ОргТехСервис
Главная | Каталог | Услуги | Наши клиенты | Контакты | Техподдержка | Полезная информация

Коды ошибок Brother DCP 7010

Brother DCP7010 Trouble Error Codes

Код ошибки

Описание

Причина

56 The back cover is opened.  
5B New toner detection lever Error (Toner switch stays on.) New toner detection lever broken. New toner detection switch defective
6A Heater warming-up timeout error. (Heater does not reach 60 within 11 second.) Thermistor defective Halogen heater defective
6B Heater warming-up timeout error. (Heater does not reach 100 within 15 second.) Thermistor defective Halogen heater defective PS PCB defective
6C Heater temperature exceeds the maximum high temperature. (270 or more is detected for 1sec.)  
6E Heater temperature does not go up enough. Halogen heater defective PS PCB defective
6F Heater hard limiter operates. Thermistor defective PS PCB defective
71 Scanner motor does not synchronize with the reference clock. Laser unit defective Main PCB defective
72 Cannot detect Beam Detect signal. Laser unit defective Main PCB defective
73 The drum unit is not mounted.  
74 Toner empty Toner sensor defective Toner empty
75 In casing temperature error. In casing temperature sensor defective
76 Heater overheat Thermistor defective in Fixing unit Halogen heater defective
77 The power supply is turned off when the error 76 or 78 occurs.  
78 Temperature of the heater does not rise Poor connection in the harness of the halogen lamp Halogen lamp defective Thermistor defective PS PCB unit defective Main PCB defective

Brother DCP 7010 ошибка 56, 5B, 6A, 6B, 6C, 6E, 6F, 71, 72, 73, 74, 75, 76, 77, 78

Brother 7010 Сброс ошибки, Brother 7010 как сбросить ошибку?

Главная | Каталог | Услуги | Наши клиенты | Контакты | Техподдержка | Полезная информация

Rambler's Top100